Meike MK-930 Speedlite Flash For Nikon

Description

Meike MK-930 Speedlite Flash For Nikon   DESCRIPTION:   The improved wireless triggering sensor: Meike improves the wireless triggering sensor for MK930, which makes the s1 and s2 mode can mode can be used in outdoor environment and the wireless triggering distance is as long as 15m. New charging socket for external power pack: adds a charging socket for external power pack, power pack, to meet your higher demand for charging recycle. New pc synchronous port: adds a standard pc synchronous port, which makes it simple for you to use the pc synchronous line. Super speed of charging recycle: it only takes 3 seconds in charging after full power output: even without new batteries, you can get the super charging speed than it only needs 4-5 seconds; you can use the external power pack to accelerate the charging speed once more. High speed continuous shooting: Under the output level of 1/8 or below, MK930 can support the 8FPS high speed continuous shooting. The improved power saving mode: in the power saving mode, the flash will get automatic shutdown.   M mode In M mode, you can set the flash output level as you like. You can adjust the flash output level, the adjustment range of the flash output level is 1/128-1/1.There are 8 levels of output and each level has 8 fine tuning stalls, the <up><down> is used to fine tune the output power, the output level is indicated by the output power indicator, for shooting, what you need is to set the flash output level, adjust the camera and press the shutter, the flash will flash with the synchronic signal of the camera. S1/S2 modes By pressing the <mode switch button>, the flash will step into the s1/s2 mode, these two modes are suitable to be used as off –camera auxiliary light, so as to create a variety of lighting effects, they are suitable for manual flash environment and TTL flash environment respectively. Under these two modes, the way to adjust the output level is like that in M Mode, which is to press the flash head to make the wireless triggering sensor face with the master light. S1 mode When the flash is in s1 mode, it will work with the first work of the master flash synchronously, with the result consistent with the use of radio slave, to use this mode correctly, the master flash should be set at manual flash and the TTL flash system with preflight function and the red-reduction function with multiple flashes  should not be used. S2 mode It is also called" pre-flash cancel mode", this mode is similar with S1 mode, but is can neglect the pre-flash given by TTL flash; therefore, it can support the main flash working in TTL Mode. IN particular, if s1 mode cannot flash correctly and synchronically with your internal flash, you can try to use s2 mode.       SPECIFICATIONS: Circuit Design Insulated Gate Bipolar Transistor (IGBT) Guide Number 58 meters (ISO 100,85mm) Flash Model M,S1,S2 Vertical rotation angle 0-90 degrees Horizontal rotation angle 0-270 degrees Power supply 4 X AA size batteries(Alkaline or Ni-MH are usable) Lighting times 100-1500 times (AA alkaline cell used) Recycle time approx 3s Color temperature 5600K Flash time Flash time Flash control 8 levels of output control (1/128-1/1) External interface hotshoe, PC port and eternal charging port Wireless triggering disstance 20-30m indoor,10-15m outdoor Additional features Sound indicator,PC port,power saving mode and over heat protection Dimensions 200 x 75 x 57 mm Net weight 340g   THE KIT INCLUDES: - Flash - Bag   COMPATIBILITY: Nikon DSLR CamerasS2 mode

There are no customer reviews yet.
Share your thoughts with other customers